MANUFACTURING ENGINEER EXPERT WITNESSES

Expert Witness: E-452697
This highly-qualified expert has extensive experience in the field of technology manufacturing. He received his BS in mechanical engineering from Michigan Technological University before earning his MBA from the University of Michigan. He is a certified professional engineer and a member of several organizations, including the National Society of Professional Engineers, the Society of Automotive Engineers, and the American Society of Mechanical Engineers. He is active in ...
Expert Witness: E-142127
This expert has been in the field of Forensic Engineering for the past 6 years. He earned his BS from California State University of Fresno, and his MS in Mechanical Engineering from Oregon State University. He is a certified Mechanical Engineer, and currently works as an Engineering Consultant at a Forensic Engineering Firm in California.
Expert Witness: E-059103
This expert is an experienced manufacturing engineer with a solid background in 3d modeling, design, layout, and detail for products, tooling fixtures, special machinery, robotics, and conveying systems. He has held numerous senior engineering and design positions throughout his career at firms such as American Conveyor, Adaptive Manufacturing, and ABB Robotics. Currently, he is a lead project engineer at a top engineering firm.
Expert Witness: E-275992
This highly qualified expert is a registered professional engineer with over 15 years of experience in geotechnical and structural design in roles spanning from engineering consulting to senior executive in a manufacturing company. He received a diploma in civil engineering with an emphasis on structural engineering from Germany and a Ph.D. in civil engineering with an emphasis on geotechnical engineering from The University of Arizona. He holds professional engineering ...
Expert Witness: E-160004
This expert has over 20 of wide-ranging engineering experience. He holds a Ph.D. in Mechanical Engineering from the University of New Mexico and an M.S. in Mechanical Engineering from Utah State University. He has held roles at Sandia National Laboratories in Albuquerque, New Mexico working on earth penetration weapons research and other advanced weapon concepts as well as a leading a hydrokinetic marine turbine manufacturing company. Currently, he is a principal of a ...
Expert Witness: E-055646
This qualified expert of Mechanical Engineering and Industrial Machinery obtained his BS in Mechanical Engineering from Iowa State University and his MA in Management from Regent University. He is a registered Professional Engineer and is certified in SolidWorks, Motion Control and CNC Product Lines, Fire Investigation, Reliability & Maintainability and has 9 Patents. He is currently the President of a Product Manufacturing Firm and the President of an Engineering Consulting.
Expert Witness: E-044730
This expert has over 20 years of expertise in materials consulting and forensic engineering work. He received a bachelor's in manufacturing engineering from Brunel University of West London. He continued on at Brunel to earn his PhD in metallurgy. A licensed metallurgical engineer, he is a member of the American Society of Testing & Materials and the American Society of Materials International. He served as a senior metallurgical engineer at Testing Engineers INC. and a ...
Expert Witness: E-004636
This expert has extensive experience in dealing with and managing Chinese manufacturing of all kinds as a global chain strategist and architect. On top of the manufacturing process, she has also dealt with quality control of Chinese manufactured products. She has dealt with several Chinese liability cases.
Expert Witness: E-090824
This expert specializes in infection control. He earned his PhD in Bioengineering from the University of Pennsylvania and pursued a fellowship focused on diagnostic imaging at the Temple University School of Medicine. For two decades, he worked for a firm manufacturing automated endoscope reprocessors, serving as the Director of R&D and the Chief of Infection Control. He currently owns a consultancy focused on healthcare quality and safety; he is also a prolific writer ...
Expert Witness: E-086648
This international technology expert has hands-on experience in all aspects of agriculture, including crop production, equipment design, R&D, teaching, manufacturing, and marketing. He has four advanced degrees in business/engineering, including a Ph.D. in the Automation of Technological Processes from the National University of Life and Environmental Science of Ukraine. He has authored 70+ publications and holds 11 U.S. patents, as well as others from Canada, the EU, ...
Expert Witness: E-083384
This qualified expert received his BS in Mechanical Engineering from Rose-Hulman Institute of Technology and his MS in Mechanical Engineering from Purdue University. He is a licensed Indiana Professional Engineer. He has been the recipient of 7 patents related to seat belts and safety seats, and has published 5 journal articles related to vehicle safety. Formerly, he was a Turbopump Test Engineer at Rocketdyne, a manufacturing engineer at Rolls Royce; and a R&D engineer, ...

MANUFACTURING ENGINEER EXPERT WITNESS CASE STUDIES

Allegedly Defective Candle Starts Dangerous House Fire MANUFACTURING ENGINEER Expert Case

Allegedly Defective Candle Starts Dangerous House Fire

…  was improperly formulated and improperly mixed during manufacturing. An expert in candle manufacturing was sought to explain how wax and oils are mixed together in the …

Engineering Design Flaw Blamed For Brewery Construction Complications MANUFACTURING ENGINEER Expert Case

…  to have both the facility and its equipment designed and engineered by the construction company. Once construction of the facility …  An expert with experience designing, building, and engineering brewery plants was sought to review the evolution of the project …

Defective Manufacturing Processes Cause Electrical Faults in Luxury Vehicle MANUFACTURING ENGINEER Expert Case

This automotive mechanics case involves a model of luxury hybrid sedan that was allegedly improperly manufactured, with defects specifically involving the sealing of electrical components within the vehicle’s engine compartment. Individuals who purchased  …

Mechanical Engineering Experts Evaluate Fatal Injury Caused by Runaway Machinery MANUFACTURING ENGINEER Expert Case

…  case involves a female employee of a large contract manufacturing firm who suffered fatal injuries while on the job. On the date of …  lathes and milling machines in her capacity as a managing engineer. The woman was in the process of inspecting an active lathe when the …

Man Suffers Significant Injuries After Fall in Hotel Bathroom MANUFACTURING ENGINEER Expert Case

This case involves a man who was staying at a high-end hotel chain while on business in southern California. During his first night in the hotel, the man went to use the shower, where he noted the unusually slippery nature of the tub’s surface. The tub was …

Mechanical Engineering Experts Opine on Unsafe Riding Mower Design MANUFACTURING ENGINEER Expert Case

This case involves an accident in which a young child was run over by a ride on lawnmower. The 4 year old girl had been playing in the backyard of her parents’ home at the time of the accident, while her father was mowing the lawn on a popular brand of r …

Engineering Expert Witness Opines on Defective Trailer Strap MANUFACTURING ENGINEER Expert Case

Engineering Expert Witness Opines on Defective Trailer Strap

This case takes place in California and involves permanent eye injury from a hook snapping into the plaintiff’s eye due to an allegedly defective strap. The plaintiff was preparing a flatbed trailer to haul a load of cinder blocks. In order to ensure that  …

Ladder Failure Linked to Manufacturing Flaw MANUFACTURING ENGINEER Expert Case

Ladder Failure Linked to Manufacturing Flaw

This is a products liability case that takes place in Arkansas and involves a fiberglass extension ladder. The plaintiff in this case was using the ladder to assist him while he repainted the exterior of the house. While he was working, the fiberglass fram …