Homeowner is Injured by Construction Debris

ByJoseph O'Neill

|

Updated onJanuary 25, 2018

Homeowner is Injured by Construction Debris

This case involves a homeowner that hired a property restoration company to repair his roof. Once the contractor finished with the work, they cleaned up the property, hauled the dumpster away, and told the owner of the home that they had finished before leaving. When the owner went to examine the roof from her front yard, she stepped on a sharp chunk of roof flashing. The injury she sustained eventually became infected, and resulted in a protracted recovery. It was alleged that the contractor did not follow appropriate sweeping procedures to remove scrap metals after finishing their work.

Question(s) For Expert Witness

1. Please describe your experience in roof repair as it pertains to post-job sweeping.

2. What standards exist to ensure that nails and other scrap metal are removed from the property after a job is finished when sweeping with a magnet?

Expert Witness Response E-185843

inline imageFirst of all, the homeowner should always do their research to determine if the contractor they are hiring to perform the work is actually licensed and insured. They should always check the BBB for the company rating and any reviews posted online. This is a great tool to weed out shady contractors. The homeowner should always be presented with a scope of work and expectations of the job which will include a signed contract, work order and any other pertinent documents necessary to the job. In addition, all homeowners should ask for a copy of the business license and proof of insurance in the event this wasn't already presented during their initial meeting with the contractor. This is standard practice with a reputable company. If the homeowner selects a reputable roofer to perform the work then they should have no problem providing the documentation. Again, this will identify who will be performing the work and their credentials.

inline imageTypically unless written in the contract otherwise, at the end of the job the roofer is responsible to clean up the debris and haul it away which would include but not limited to using a magnet to pick up nails. This is common practice across the industry. However, even when the magnet is used properly and thoroughly it's not possible to get every single piece of metal that may drop in ones yard.

inline imageThis is an unfortunate situation, however, this is a common problem among all roofing companies. If you will, the roofers are on top of the roof slinging debris over the edge to the ground. It's likely debris can go just about anywhere and get lodged into the ground. My company policy has always been to have my roofers use the magnet after all debris is cleaned up and we do this for every single job. In addition, typically the same day or the following day my quality control lead does a final inspection of the roof which includes using the magnet a 2nd time to minimize stray metal that was previously missed by the roofers. This is our policy for every single job and we have the homeowner sign the final inspection showing this was completed to their satisfaction.

About the author

Joseph O'Neill

Joseph O'Neill

Joe has extensive experience in online journalism and technical writing across a range of legal topics, including personal injury, meidcal malpractice, mass torts, consumer litigation, commercial litigation, and more. Joe spent close to six years working at Expert Institute, finishing up his role here as Director of Marketing. He has considerable knowledge across an array of legal topics pertaining to expert witnesses. Currently, Joe servces as Owner and Demand Generation Consultant at LightSail Consulting.

Find an expert witness near you

What State is your case in?

What party are you representing?